Altronix NetWay16M Instalační příručka Strana 8

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 7
- 8 - NetWay8M/NetWay16M
Configuring NetWay8M/NetWay16M for network connection:
SinceeveryNetworkConfigurationisdifferent,pleasecheckwithyourNetworkAdministratortoseeifyourNetWay8M/
NetWay16MshouldusestaticIPaddresses,orDHCPassignedIPaddressesand/anInboundPortassignmentpriortoset-
tingupnetworkconnection.
1. ClickNetworkSettingslink.
If you are prompted for an administrative password, type and submit the password.
Note:Defaultsettingshavepasswordrequirementsturnedoff.
2. NetworkSetuppagewillbedisplayed.YoumaynowconfigureyourNetWay8M/NetWay16Mfornetwork
connection.
Figure6isascreenshotoftheNETWORKSETTINGMENU.ThismenuisforconfiguringtheNetWay8M/NetWay16M
unitsforanetworkconnection.
NetworkType:
StaticIP:UsercansetafixedIPfornetworkconnection.
DHCP:DHCPserverinLANwillautomaticallyanassignIPconfigurationforthenetworkconnection
IP:ThisfieldshowstheNetWay8M/NetWay16McurrentIPAddress.AstaticIPaddressmustbesetmanually.IfDHCP
this value will be assigned automatically.
SubnetMask:ThisfieldshowsthesubnetmaskforyournetworksotheNetWay8M/NetWay16Mwillberecognized
withinthenetwork.IfDHCPisselected,thisvaluewillbeassignedautomatically.
InboundPort:PortnumberforHTTP/WEBcommunication.
HostName:NameoftheNetWay8M/NetWay16MdeviceontheLAN
Additional information:
1.IfusingDHCP,allsettingswillbedetectedautomatically.
WhileDHCPisausefultoolfordeterminingthenetworksettings,ifyousetupyourNetWay8M/NetWay16Minthis
manner its IP address may change at different times for different reasons, particularly after a power failure. If the IP
address of the NetWay8M/NetWay16M changes, you may have difficulties accessing your NetWay8M/NetWay16M lo-
cally and/or remotely.
ItisstronglyrecommendedthatyouconnectviahostnamewhenunitsconfiguredasDHCP.
PleasedonotsettheDHCPaddressissuedtotheNetWay8M/NetWay16MbytherouterasitsstaticIPaddressunlessyou
takespecificstepsthatprogramyourroutertopreventsuchaddressconflicts.
2.IfusingaStaticIP(recommended),youwillneedtoinputtheinformationmanually.InorderforDDNStowork,you
mustentervaliddata,compatiblewithyournetwork,forallofthenetworksettingfields:IPaddress,SubnetMask,In-
boundPortandHostName.
3.Ifyouareconnectingthrougharouter,makesurethatyouhave‘openedup’alltherequirednetworkportsintheport
forwardingsectionofyourrouter’ssetupoptions.Thatis,youhavedirectedtheroutertosendanyincomingtrafficusing
thoseIPportstotheLANIPaddressoftheNetWay8M/NetWay16M.Usefulinformationaboutrouterportforward-
ingcanbefoundatwww.portforward.com.Differentroutersmayusedifferenttermsforportforwardingfunction.For
instance,D-Linkcallsitvirtualserver,Netopiacallsitpinholes.
The default port for NetWay8M/NetWay16M is: 80
Zobrazit stránku 7
1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře