Altronix Maximal33R Data Sheet Uživatelský manuál stáhnout pdf

Maximal33R rack mount access power controller distributes and switches power

to access control systems and accessories. It converts a 115VAC 50/60Hz input

into sixteen (16) independently controlled 12VDC and/or 24VDC fuse pro-

tected outputs. Outputs are activated by an normally open (NO) or normally

closed (NC) dry trigger input from an Access Control System, Card Reader,

Keypad, Push Button, PIR, etc. This unit will route power to a variety of access

control hardware devices including: Mag Locks, Electric Strikes, Magnetic

Door Holders, etc.

Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP

Interface enables Emergency Egress, Alarm Monitoring, or may be used to

trigger other auxiliary devices. The fire alarm disconnect feature is individually

selectable for any or all of the outputs.

Input:

• 115VAC60Hz.,3.8amp.

• Normallyclosed[NC]ornormallyopen[NO]

dry contact inputs (switch selectable).

Outputs:

• 12VDCor24VDC@12amptotaloutputcurrent.

 Powersupply1/(8)outputs:

 12VDC@6ampor24VDC@6amp

 Powersupply2/(8)outputs:

 12VDC@6ampor24VDC@6amp

• Sixteen(16)fuseprotectedoutputs.

• MaximumcurrentperACM8R-Moutputis2.5amp.

• IndividuallyselectableMagLock/Strike(Fail-Safe,

Fail-Secure) solid state fuse protected outputs.

• Thermalandshortcircuitprotectionwithautoreset.

Fire Alarm Interface:

• LatchingorNon-Latchingfirealarmresetswitch

individually selectable for each output.

• RemoteresetcapabilityforlatchingFireAlarm

Interface mode.

• FireAlarmdisconnectinputoptions:

 a)Normallyopen[NO]ornormallyclosed[NC]

dry contact input.

b)Polarity reversal input from FACP signaling

circuit.

Visual Indicators:

• IndividualOutputStatusLEDslocatedonthe

front panel.

Battery Backup:

• Built-inchargerforsealedleadacidorgeltype

batteries (if batteries are required install

separate enclosure).

• Maximumchargecurrent0.7amp.

• Automaticswitchovertostand-bybattery

when AC fails.

• Zerovoltagedropwhenunitswitchesovertobattery

backup (AC failure condition).

Supervision:

• ACfailsupervision(form“C”contact).

• Lowbatteryandbatterypresencesupervision

 (form“C”contact).

Additional Features:

• Removableterminalblockswithlockingscrewflange.

• 3-wirelinecord.

• Illuminatedmasterpowerdisconnectcircuitbreaker

with manual reset.

Mechanical:

• Dimensions(HxWxD)(approx.):3.25”(82.55mm)x

19.125”(485.78mm)x8.5”(215.9mm)

• Shipping Weight (approximate): 14.3 lbs (6.49kg).

Maximal33R

Rack Mount Access Power Controller

Rev. DSMaximal33R - 11012012

Overview

Specifications

Maximal33R

1 2

Maximal33R 1
TOP & BOTTOM 2

Shrnutí obsahu

Strany 1 - Maximal33R

Maximal33R rack mount access power controller distributes and switches power to access control systems and accessories. It converts a 115VAC 50/60Hz

Strany 2 - TOP & BOTTOM

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.comFRONTTOP & BOTTOMREARMaximal33R Rack Chassis Dime

Komentáře k této Příručce

Žádné komentáře

Altronix Maximal33R Data Sheet Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro elektriku Altronix Maximal33R Data Sheet. Altronix Maximal33R Data Sheet User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství pro elektriku Altronix Maximal33R Data Sheet