Altronix HubWay LDH8 Installation Instructions Uživatelský manuál stáhnout pdf (Strana 2)

- 2 - HubWayLDH Active Hub Unit

Overview:

Altronix HubWayLDH8/16 Active UTP Transceiver Hub transmits UTP video and RS422/RS485 data over a single

CAT-5 or higher structured cable. Unit provides 8 or 16 camera channels in a space saving 1U EIA 19” rack mount chas-

sis which may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are

compatible with fixed or PTZ cameras. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power

can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable

back to the HubWayLDH8/LDH16. In addition, the HubSat4D provides power to these cameras locally to eliminate the

possibility of voltage drop associated with long cable runs.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

This installation should be made by qualified service personnel and should conform to all local codes.

HubWayLDH Specifica tions:

Agency Listings:

• ULListedforCommercialCCTVEquipment(UL2044).

CUL Listed - CSA Standard C22.2 No.1-04, Audio,

 VideoandSimilarEquipment.

• CEapproved.

Data:

• RS422/RS485 data inputs.

Visual Indicators:

•ACinputpowerindicator.

•VideosignalLEDindicators.

Features:

• PictureandGaincontrol.

• Illuminatedmasterpowerdisconnectcircuitbreaker

with manual reset.

• IEC320-3-wiregroundedlinecord(detachable).

• Unitcanberack,wallorshelfmounted.

• 1UrackmountchassisforuseinstandardEIA19”rack.

Accessories:

• OptionalHubSat4Dallowstransmissionofupto

 four(4)videosignalsoverasingleCAT-5orhigher

structured cable.

HubWayLDH8

Input:

• 115VAC60Hz,1.5ampor

 230VAC50/60Hz,1amp.

Video:

• Eight(8)channelsofvideoovertwistedpairupto

a distance of 3000 ft. per channel.

• Eight(8)75ohmvideooutputs.

HubWayLDH16

Input:

• 115VAC60Hz,3ampor

 230VAC50/60Hz,1.5amp.

Video:

• Sixteen(16)channelsofvideoovertwistedpairupto

a distance of 3000 ft. per channel.

• Sixteen(16)75ohmvideooutputs.

Common Specifica tions:

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

Altronix HubWay LDH8 Installation Instructions Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství pro elektriku Altronix HubWay LDH8 Installation Instructions