
HubWayEXP UTP Power Injector - 3 -
HubWayDvVideoBalun/CombinerLEDswillilluminateindicatingpowerispresent (Fig. 1b, 1d, pg. 3).
10. Measure the output voltage at each Video Balun/Combiner (Figs. 1b, 1d, pg. 3)beforemakingconnectionsto
each camera to insure proper operation and avoid possible damage.
11. Setilluminatedmasterpowerdisconnectcircuitbreakertothe(OFF)position(Fig. 6, pg. 7).
12. Connect power outputs of HubWayAv or HubWayDv Video Balun/Combiners to power inputs
of cameras (Figs. 1a-1d, pg. 3). Polarity must be observed.
• HubWayAv-Terminalsmarked[ACPOWER](Figs. 1a, 1b, pg. 3).
• HubWayDv-Terminalsmarked[–12VDC+](Figs. 1c, 1d, pg. 3).
13. Connecttheterminalsmarked[+DATA--]ofHubWayAvorHubWayDvVideoBalun/Combiners
to data input terminals of cameras for PTZ control (Figs. 1b-1d, pg. 3). Polarity must be observed.
When using fixed cameras disregard this step.
14. Connect the BNC connector of HubWayAv or HubWayDv Video Balun/Combiners to the
BNC video outputs of cameras (Figs. 1b-1d, pg. 3).
15. UponcompletionofwiringsetilluminatedmasterpowerdisconnectcircuitbreakertotheRESET(ON)position
(Fig. 6, pg. 7).
16. ThepowerLEDslocatedonthefrontoftheHubWayEXP will illuminate when AC power is present (Fig. 3b, pg. 4).
Note:IfanyoftheseLEDsarenotilluminatedeitheravoltageoutputselectorswitchisintheOFFpositionorthe
PTC is tripped for that channel.
To reset the PTC:
1. SetthevoltageoutputselectorswitchforthatcorrespondingchanneltotheOFFposition.Switchmustremain
in the OFF position for approximately 2 minutes in order for the PTC to reset.
2. Eliminate the trouble condition (short circuit or overload).
3. Setthevoltageoutputselectorswitchfor24VACor28VAC(Fig. 3c, pg. 4).
1 - White/Orange [VIDEO +]
2 - Orange [VIDEO -- ]
3 - White/Green [DATA +]
4 - Blue [AC 1]
5 - White/Blue [AC 2]
6 - Green [DATA -- ]
7 - White/Brown [AC 2]
8 - Brown [AC 1]
Fig. 2 - CAT5 Wiring Color Codes
VIDEO BALUN/COMBINER
CAT5 + DATA - - POWER
AC
VIDEO
HubWayAv
VIDEO
AC Power
to Camera
Data to
Camera
- -
+
Data to
Camera
Green Power LED
12VDC Power
to Camera
+
- -
Red Power LED
Wire
Connectors
RJ45 Jack RJ45 Jack
T o BNC
Connector
of Camera
T o BNC
Connector
of Camera
Structured
Cable from
HubWayEXP
Structured
Cable from
HubWayEXP
VIDEO BALUN/COMBINER
HubWayDv
CAT5 + DATA - - - - 12VDC+
- -
+
Wire
Connectors
Fig. 1 - HubWayAv and HubWayDv Video Balun/Combiners
Fig. 1c
Fig. 1a
Fig. 1b Fig. 1d
HubWayAvpassesACvoltagethroughpins4,5,7,8and
[ACPower]terminals.
HubWayDv converts AC voltage to DC voltage through
pins4,5,7,8and[--12VDC+]terminals.
Komentáře k této Příručce