Altronix ALSD1 Installation Instructions Uživatelský manuál stáhnout pdf

Overview:

ALSD1 is a high output very low current draw dual channel siren driver designed to work with alarm panels with

limited current capability.

Specifications:

• 6VDC or 12VDC operation.

Parallel or series speaker wiring

113 db @ 10’ @ 6 Volts - 8 Ohms

115 db @ 10’ @ 6 Volts - 4 Ohms

116 db @ 10’ @ 12 Volts - 8 Ohms

120 db @ 10’ @ 12 Volts - 4 Ohms

Current draw range from .5 amp to 1.8 amp based on speaker

resistance and supply voltage.

• Two (2) channel operation - steady or yelp.

• Very low current draw.

Board Dimensions (approximate): 3”H x 2.5” W x .6” D

Installation Instructions:

1. Mount the ALSD1 in desired location.

2. Connect 4 Ohm or 8 Ohm speakers to terminals marked SPKR (see suggested speaker wiring diagrams below).

3. Connect 6VDC to 12VDC from output terminals on control panel or other desired power source

(observing polarity) to (--- ) negative and STY+ or YLP+ on ALSD1.

Note: Steady tone overrides yelp tone if both channels are triggered simultaneously.

Typical Speaker Wiring Diagrams:

ALSD1 - Siren Driver

ALSD1

SIREN DRIVER

YLP+

SPKRGND

STY+

Q3Q5

ALSD1

SIREN DRIVER

ALTRONIX CORP.

BROOKLYN. NY 11220

MADE IN USA

YLP+

SPKRGND

STY+

Q3Q5

Two (2) Speakers

8 Ohms each

Three (3) Speakers 8 Ohms each

ALSD1

SIREN DRIVER

BROOKLYN. NY 11220

MADE IN USA

YLP+

SPKRGND

STY+

Q3Q5

Four (4) Speakers 4 or 8 Ohms each

ALSD1

SIREN DRIVER

ALTRONIX CORP.

BROOKLYN. NY 11220

MADE IN USA

YLP+

SPKRGND

STY+

Q3Q5

Two (2) Internal/External Hook-up

Fusing External Speakers:

Speakers that are accessible from outside a building

should have a 2.5 amp fuse placed in series with the

speaker leads so that any attempt to short the speaker

leads will blow the fuse on that speaker while other

speakers will continue to operate.

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056

web site: www.altronix.com, e-mail: [email protected], Lifetime

Warranty, Made in U.S.A.

IIALSD1 - Rev. 111101 K09F

MEMBER

Voltage Current Drain Load

6V .48A 8 Ohms

6V .50A 4 Ohms

12V .92A 8 Ohms

12V 1.86A 4 Ohms

ALSD1 - Siren Driver 1

Shrnutí obsahu

Strany 1 - ALSD1 - Siren Driver

Overview:ALSD1 is a high output very low current draw dual channel siren driver designed to work with alarm panels withlimited current capability.Spec

Komentáře k této Příručce

Žádné komentáře

Altronix ALSD1 Installation Instructions Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro elektriku Altronix ALSD1 Installation Instructions. Altronix ALSD1 Installation Instructions User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství pro elektriku Altronix ALSD1 Installation Instructions